Kyoritsu8115 Clamp Sensors/Adaptors KYORITSU Clamp Sensors Malaysia, Kuala Lumpur, KL, Singapore. Supplier, Suppliers, Supplies, Supply

Pacific Radio (M) Sdn Bhd
[16370-U]
80, Jalan Pasar, Pudu,
55100 Kuala Lumpur,
Malaysia.

+603-9221 8631 (6 Lines)

+603-9221 4216

+603-9221 3867

+6018-208 2618

+603-9221 8630

+603-9223 4109

Pacific Electronic (S) Pte Ltd
1 Rochor Canal Road,
#01-10/11/12,
Sim Lim Square,
Singapore 188504.

+65-6294 0851

+65-6337 1132

+65-6339 5884

+65-6339 8454

+65-6338 3609

Kyoritsu8115 Clamp Sensors/Adaptors

2 / 21

• Permits extension of the AC and DC current ranges of almost any Digital Multimeters (DMMs) without breaking the circuit under test.

• Using KEW 8115 with KEW 1051/1052 (DMM) the display can be set for direct reading in A.

Measuring range	AC 0.1 - 130Arms (185Apeak)	DC 0 - ±180A
Output voltage	AC 10mV/A	DC 10mV/A
Accuracy	±1.2%rdg±0.4mV (50/60Hz) ±2.5%rdg±0.4mV (40 - 1kHz)	±1.2%rdg±0.4mV (*)
Low battery warning	2.2V±0.2V or less - Red LED flash (1.9V±0.2V - Automatically power off)
Conductor size	Max. Ø12mm
Withstand voltage	AC 3540V (RMS 50/60Hz) for 5 sec.
Operating temperature & humidity range	-10 to 55ºC, relative humidity 85% or less (no condensation)
Output impedance	Approx. 10Ω or less
Applicable standards	IEC 61010-1 CAT III 300V Pollution degree 2, IEC 61010-2-032, IEC 61326-1
Power source	DC3V (size AAA alkaline battery LR03×2pcs) * Continuous use: approx. 40 hours (Auto power off: approx. 20 minutes)
Cord length	Approx. 1,200mm
Output connector	Φ4mm banana plug
Dimensions	127(L)×42(W)×22(D) mm
Weight	Approx. 140g
Accessories	Soft case, LR03×2, Instruction manual

*This accuracy is defined after the completion of the Kew 8115 zero-adjustment whilst connected to a DMM.

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Ship to Name
Shipping Address
Attachment		*only support gif, jpeg, jpg, png, pdf
Messages*